zoloto valves

Approx. 250 / Piece Get Latest Price

Salient Features:

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Full Bore, Two Piece Design.
• Quarter Turn, Lever Operated.
• Provided with Forged Brass Hard Chrome Plated Ball.
• Premium Quality PTFE Gland Packing and Seating.
• Chrome Finish.

Approx. 5,000 / Piece Get Latest Price

Product Brochure
BEST QUALITY BUTTERFLY VALVES. MOSTLY USED IN HVAC LINES

Approx. 150 / Piece Get Latest Price

ZOLOTO BALL VALVES FULL RANGE FORGED BRONZE AND SS FROM 8MM TO 100MM

Approx. 1,000 / Piece Get Latest Price

BUTTERFLY VALVES OF PN10-25 OF ZOLOTO KARTAR ADVANCE CASTLE HONEYWELL SKS 

Approx. 2,500 / Piece Get Latest Price

Approx. 7,500 / Piece Get Latest Price

Product Brochure
Salient Features:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Lever Operated.
• S.G Iron construction.
• S.G Iron disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS  6392 Table 17 and IS 1538.

Approx. 7,500 / Piece Get Latest Price

Product Brochure
Salient Features:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Gear Operated.
• S.G Iron construction.
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene / Viton / Silicon) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

Approx. 6,500 / Piece Get Latest Price

Product Brochure
Salient Features:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Lever Operated.
• S.G Iron construction.
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

Approx. 9,000 / Piece Get Latest Price

Product Brochure
Salient Features:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Gear Operated.
• S.G Iron construction.
• S.G Iron disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

Approx. 5,500 / Piece Get Latest Price

Product Brochure
Salient Features:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Lever Operated.
• S.G Iron construction.
• S.G Iron disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

Approx. 14,000 / Piece Get Latest Price

Product Brochure
Salient Features:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Electrical Acuator Operated.
• S.G Iron construction.
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems.
• Actuator is with position indicator and adjustable center stopper for both open and closed position.
• Compliant with B.M.S (Building Management System).
• Can be provided with extended wire for ease of installation.
• IP 67 protection available for outdoor application.
• Inbuilt micro switch position feedback.
• Input Voltage – 24/230 V power supply.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

Approx. 15,000 / Piece Get Latest Price

Product Brochure
Salient Features:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Double Acting Pneumatic Actuator Operated.
• S.G Iron construction.
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems.
• Actuator is with position indicator and adjustable center stopper for both open and closed position.
• Scotch Yoke Technology as the most suitable mechanism for valve and damper operation, producing higher torque at both end positions.
• Actuator is without  Rack and Pinion for smooth operation and longer life.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

Approx. 5,500 / Piece Get Latest Price

Product Brochure
Salient Features:

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Lever Operated.
• S.G Iron construction.
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

Approx. 1,650 / Piece Get Latest Price

Product Brochure
Salient Features:

• Screwed Female Ends to BSPT.
• Straight Pattern, Screwed in Bonnet, Inside Screw, Rising Stem.
• Provision for re-packing under pressure.
• Handwheel Operated.
• Premium Quality lubricated Gland Packing.
• Renewable 13% Cr. Stainless Steel (S.S 410) working parts.
• Heat treated body seat ring and disc for extended life.